Passion and commitment
Menu
HYDRAULIC GEARBOXES
To ensure the correct use of the product we recommended to pay attention to the specifications mentioned on our technical sheet. Consider also the input rotation speed, the power input and the transmission ratio. Where the rotation speed or other working conditions are different, please contact CMR Group technical department.
The reducer CMR Group is usually supplied without lubricant. The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 300-400 hours of running, then replaced after 2.000 working hours. The emptying of the gearbox should be made immediately after the working, with still oil hot, in order to avoid the deposition of sludge. Clean the oil plugs. Check frequently the oil level and top up the oil whenever necessary.
General features: GJL 250 and GJS 400 casings, 18NiCrMo4 – 20CrMnTi gears, high quality bearings, 40 Cr and C45 tempered bushings. For further information, consult the technical catalogue or contact the CMR Group Technical Office.
H045: transmission ratio up to 1.9:1, nominal output torque 500 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H90: transmission ratio up to 3.1:1, nominal output torque 900 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H120: transmission ratio up to 4:1, nominal output torque 1,200 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H150: transmission ratio up to 8.15:1, nominal output torque 1,500 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H150B: transmission ratio up to 12:1, nominal output torque 1,500 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H190: transmission ratio up to 10.2: 1, nominal output torque 1,900 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H200: transmission ratio up to 16.43:1, nominal output torque 2,000 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H300: transmission ratio up to 29.5:1, nominal output torque 3,000 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H350: transmission ratio up to 12.1:1 - 24.3:1, nominal output torque 3,500 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H400: transmission ratio up to 35.35:1, nominal output torque 4,000 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H500-H501: transmission ratio up to 43.6:1, nominal output torque 5,000 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H650: transmission ratio up to 37.8:1, nominal output torque 6,500 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
H800: transmission ratio up to 37.7:1, nominal output torque 8,000 Nm, operating temperature -20 ° C / + 80 ° C
Manure spreader
not available
CROSSBARS
To ensure the correct use of the product we recommended to pay attention to the specifications mentioned on our technical sheet. Consider also the input rotation speed, the power input and the transmission ratio. Where the rotation speed or other working conditions are different, please contact CMR Group technical department.
The reducer CMR Group is usually supplied without lubricant. The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 300-400 hours of running, then replaced after 2.000 working hours. The emptying of the gearbox should be made immediately after the working, with still oil hot, in order to avoid the deposition of sludge. Clean the oil plugs. Check frequently the oil level and top up the oil whenever necessary.
General features: GJS 400 casings, 18NiCrMo4 – 20CrMnTi gears, 42CrMo4 main shaft, 20CrMnTi input / output shaft. For further information, consult the technical catalogue or contact the CMR Group Technical Office.
S0-55: gear ratio up to 1.28:1, power up to 55HP, GJS400 cast iron casting
Manure spreader
not available
SP01-55: gear ratio up to 1:1, power up to 50HP, GJS400 cast iron casting
Manure spreader
not available
SP02-55: gear ratio up to 1.63:1, power up to 55HP, GJS400 cast iron casting
Manure spreader
not available
SP04-55: gear ratio up to 1:1, power up to 50HP, GJS400 cast iron casting
Manure spreader
not available
SPC04-55: gear ratio up to 1:1, power up to 55HP, GJS400 cast iron casting
Manure spreader
not available
SP02-85: gear ratio up to 1.38:1, power up to 85HP, GJS400 cast iron casting
Manure spreader
not available
SP02-140: gear ratio up to 2.39:1, power up to 103HP, gear ratio up to 2.66:1, power up to 99.5HP, GJS400 cast iron casting
Manure spreader
not available
SP02-160: gear ratio up to 2.47:1, power up to 160HP, GJS400 cast iron casting
Manure spreader
not available
SP02-240: gear ratio up to 2.47:1, power up to 240HP, GJS400 cast iron casting
Manure spreader
not available
Fill out the contact form or request a consultation from our Technical Department
CMR Group has been designing and manufacturing mechanical components for a variety of industrial sectors for 30 years. The company boasts important collaborations with Italian and foreign customers, mainly in the agricultural, industrial and ceramic machinery sector.
